Table of contents:, Accu-Chek Guide Accu-Chek Guide Link Accu-Chek…, Accu-Chek Guide and Accu-Chek Guide Link meters:, Check the, Use By, date on the test strip container and the control solution bottles. a. Do not use test strips or…, Use By, date. Controls expire three months from the date of opening. Remove the control bottle cap. Wipe…, “Apply drop”, appear on the display, squeeze the bottle until a tiny drop forms at the tip of the bottle. Touch…, yellow edge, of the test strip. a., Do not put the control solution on top of the test strip., “Analyzing”, will appear when you have enough of the control solution in the test strip. The control result and…, “Within range”, and, “✓”, appear if the control result is within range. b., “Out of range”, and an, "X", appear if the control result is out of range. Wipe the tip of the bottle with a tissue and cap the…, Accu-Chek Guide Me meter:, Check the, Use By, date on the test strip container and the control solution bottles. a. Do not use test strips or…, Use By, date. Controls expire three months from the date of opening. Remove the control bottle cap. Wipe…, yellow edge, of the test strip. a., Do not put the control solution on top of the test strip., The flashing hourglass appears when you have enough solution in the test strip. The control result…, “OK”, appears if the control result is within range. b., “Err”, appears if the control result is out of range. Wipe the tip of the bottle with a tissue and cap the…, Accu-Chek Aviva Meter:, Check the, use by, date on the test strip container. Do not use test strips past the, use by, date. Place the meter on a flat surface. Remove the cap from the control solution bottle and wipe…, front edge, of the yellow window of the test strip. Remove the bottle from the test strip when E appears., Do not put a drop on top of the test strip., Wipe the tip of the bottle with a lint-free wipe and cap the bottle tightly. The control result…, Note:, If the control bottle symbol and the flashing “L” does not appear on the display with your control…, Accu-Chek Nano Meter:, To make sure the display is working properly, turn off the meter, then press and, hold Power/Set Button, located on the right side of the meter to see the complete display. All segments should be clear…, Use By, date on the test strip container. Do not use test strips past the, Use By, date Insert the test strip into the meter in the direction of the arrows. Place the meter on a flat…, front edge, of the yellow window of the test strip., Do not put the control solution on top of the test strip, . When you see the, hourglass icon, flash, you have enough control solution in the test strip. Wipe the tip of the bottle with a tissue…, Err, alternate on the display if the result is out of range. Remove and discard the used test strip.…
